Upload the plans.
Get the roof takeoff
and the house in 3D.
Where the drawings show them clearly, VTake reads the roof faces, their pitches, the ridges, hips, valleys, eaves and rakes, labelled penetrations and the squares. When floor plans are in the set, it draws the house under the roof from them. What it cannot read or place is flagged for you to check, not guessed.
Works on vector plan PDFs with a printed scale and pitch marks. Scanned pages are read for scale and flagged for you to trace.
- roof faces the drawings show, with their pitch
- Faces
- roof faces the drawings show, with their pitch
- sloped lengths, each edge counted once
- Edges
- sloped lengths, each edge counted once
- windows and doors where floor plans show them
- Walls
- windows and doors where floor plans show them
- the house as far as the plans place it
- 3D
- the house as far as the plans place it
How it works
From plan set to sign-off
Upload the plan set
Drop in the PDF. VTake finds the roof plan views, reads each view's printed scale and checks it against the written dimensions.
VTake reads the roof and the house
Sheets are laid over the floor plan by their walls where those line up clearly; a sheet that does not line up is left off the house and flagged. Faces come from the drawn roof lines (on CAD plans, the roof layer), cross-checked against an independent roof skeleton; pitch from the slope marks, or from the elevations where the plan's hips and valleys place them; eaves, rakes, ridges, hips and valleys at their sloped length. Roof-to-wall contacts retain their drawing evidence; confirm the flashing type against the details. What it cannot read is flagged with what is missing, for you to settle.
Sign off once, then order
Check the takeoff against the plans and sign it with your name. The material order comes straight from it, from generic rules you can set for your company.
Keep the reasoning with the quantities
Numbers keep their source
Faces, edges and counts the takeoff reads record the page, view, scale check and pitch mark they came from, and how they were read, so you can open them on the plan.
Conflicts are flagged, never averaged
When a written dimension disagrees with the printed scale, or two pitches mark one face, VTake stops and asks you to settle it.
One sign-off, with your name
Clear drawing evidence is accepted automatically. You check the result and sign once. Any later change cancels the sign-off until you sign again.
The house, for the homeowner
The measured roof on the walls, windows and doors the floor plans place, coloured by material or pitch, with what it leaves out listed, and a one-page PDF with your logo, the roof's size and the materials, tied to the signed-off takeoff. Builder's options are listed, not drawn, until they are measured.
What you get out
Area and squares
Roof surface by face, by pitch and by level, net of openings.
Pitch
Per face, from the slope marks or the sheet's typical-pitch note.
Eaves and rakes
True lengths along the slope, counted once per physical edge.
Ridges, hips, valleys
Read from the drawn roof lines; shared edges counted once.
Flashing
Roof-to-wall contacts and chimney evidence; confirm flashing types against the plan details.
Penetrations
Pipe boots, vents, skylights and chimneys counted where they are labelled.
Material order
Generic rules of thumb, set per company. Confirm with your supplier.
3D house
Walls, windows and doors where the floor plans place them, under the measured roof; what does not fit is listed.
Exports
Homeowner PDF, labelled takeoff report, spreadsheet and JobNimbus.
What still needs your judgment
- Accuracy on real plans is still being measured. Our synthetic test plan sets are drawn from known geometry, and the tests compare the automatic takeoff with it; that shows the reading works on those drawings, not on yours. We have checked only a few real plan sets so far, so check every takeoff against the drawings before you sign off.
- The drawings must show the roof. Scans, missing pitch marks, lower roofs and option views need your eye. Anything VTake cannot read is flagged, not guessed.
- Material quantities are generic. They follow ordinary rules of thumb until you set your own; confirm them with your supplier.
- The 3D house is a picture of your takeoff. Its walls, windows and doors are read from the floor plans for the picture only; window heights follow the plate height unless the plans say otherwise, and assumed heights are marked. Builder's options, parapets and chimneys are not drawn. It does not certify the structure or show what the plans leave out.
Subscriptions coming
One plan for roofing estimators
The automatic takeoff, the 3D presentation, the homeowner PDF and every export in one workspace. Planned pricing:
Monthly
$200
USD per estimator per month
Unlimited takeoffs
No charge per takeoff. No annual commitment.
Each file can be up to 150 MB. Image imports can contain up to 40 million pixels. These file limits do not limit the number of takeoffs.
Subscriptions are not available yet. At launch, we plan to offer a 14 day trial without a payment card. Checkout and trial access are still being built.
See it on the sample job
Create an account and the sample plan set opens straight away: the automatic takeoff, the sign-off, the materials and the 3D roof. Then try a plan set you know.
Try the sample job